Gun Specifics:

  • Range of serial numbers: 1 – 500
  • Date of manufacture: 1840 to 1843
  • Total production: 500 including the 4th Model.
  • Length of barrel: 3 to 5½ inches with loading lever.
  • Caliber: .28 (Five shots)
  • Address: ‘-Patent Arms Paterson N-J. -Colts PT’
  • Weight: 22 ounces depending on barrel length.

Colt Paterson Fifth Model Ehlers Pocket Percussion Revolver AKA: Improved No2 Belt Model Medium Size Frame Revolver

The Fifth Model Ehlers Belt revolver or Improved No. 2 Belt Model Medium Size Frame revolver is a separate model from the Colt Belt Model Paterson Revolver No. 2 revolver. It was manufactured circa 1840 to 1843 in Paterson, New Jersey by John Ehlers who took over the Paterson company after it went bankrupt. These revolvers were made up from semi-finished parts that were completed by Ehlers with his own modifications. A total of approximately 500 were made and serial numbered 1 on up. It was serial numbered along with the Fourth Model Ehlers Pocket revolver or Improved No. 1 Pocket Model revolver. The standard Model is identified as follows:

Medium size frame with capping channel on the recoil shield; straight grip beveled at the butt; Barrels marked: ‘-Patent Arms Paterson N-J. -Colt’s Pt.-’ reading breech to muzzle (‘M’g Co.’ removed from the roll die); Octagonal barrel lengths vary from 3″ to 4½” with rifling of eleven grooves and lands; .31 caliber with folding trigger; with attached loading lever assembly as standard; five shot 1-1/16″ cylinder roll engraved with the decoration of a centaur motif, including COLT within the four-horse-head trademark.; rear of the cylinder were rounded; varnished walnut two-piece grips beveled at the butt; blued finish to all parts; serial numbers stamped on all major parts (the revolver needs to be disassembled to observe serial numbers).

As with most Colt firearms there are always exceptions to the rule with some engraved examples known and also those with silver-plated back-straps and frames, also select walnut or ivory grips. Values depend on condition, rarity and provenance. Some specimens are cased.

For in-depth reference on Paterson pistols see ‘The Paterson Colt Book featuring the Dennis A. Levett Collection’ by R.L. Wilson.

More Paterson Percussion Era

The Fourth Model Ehlers pocket revolver or Improved No. 1 Pocket Model Small Size Frame is a separate model from the Colt Pocket or Baby Model Paterson Revolver No. 1 revolver. It was manufactured circa 1840 to 1843 in Paterson, New Jersey by John Ehlers who took over the Paterson company after it went bankrupt.

The Colt Belt Model Paterson Revolver No. 2 was manufactured circa 1837 to 1840 in Paterson, New Jersey. A total of approximately 400 were made and serial numbered 1 through 850 along with the No. 2 Belt Model which shares its serial numbering.

The Colt Holster Model Paterson Revolver No. 5 also known as the “Texas Paterson” was manufactured circa 1838 to 1840 in Paterson, New Jersey. A total of approximately 1000 were manufactured serial numbered in its own range from 1 through to 1000.